Electromagnetic Flowmeter

About the product

Electromagnetic flowmeters use a magnetic field to measure fluid flow. Based on Faraday’s law of electromagnetic induction, they measure fluid velocity and flow rate. These instruments are widely used in industry and have no moving parts, helping to reduce maintenance costs.

Technical information and use

The flanged electromagnetic flowmeter measures flow using a magnetic field and the electrical signal induced by fluid movement.

The precision measurement can be made, and the absence of moving parts in the inner wood immediately provides use in corrosive liquids above all 5μs/cm conductivity value.

Instantaneous flow and total volume can be read on the three-line LCD. Analogue and pulse outputs, plus RS232 and RS485 Modbus interfaces, allow data transfer to controllers such as PLCs and PIDs.

The product is comfortable and easily assembled with horizontal or vertical flanging connection.

Wastewater Facilities, Food Industry, Textile Industry, Heavy Industry, Machinery Industry and Agricultural Irrigation are also used by providing precision in 0,2%.

General Features

• Economic Type Electromagnetic Flowmeter
• AC85-250V / DC20-36V
• 0.02 m³/h | 3817 m³/h max
• % 0.5 / ± 0.3% and ± 0.2% ± (ops.)
• DN10-DN300mm (1/2”~12”)
• Carbon steel / stainless steel 304/316 (optional)
• 0.6MPa/1.0Mpa/1.6Mpa/2.5Mpa/4.0Mpa
• PTFE / neoprene / hard rubber / F46 / PFA / polyurethane
• SS316L / Hastelloy B / Hastelloy C / titanium / tantalum / platinum
• 99% copper
• 5μs/cm
• JIS / ANSI / DIN or other
• 4-20mA, Pulse, RS485 Modbus (ops) / HART, Profibus (ops)
• Empty pipe, excitation, lower and upper limit